Dimensions
| Size (mm) |
Size (Inch) |
D | d1 | d2 | d3 | H | L1 | L2 | Material Code | Standard Pkg. |
| 15x15 | ½"x½" | 25.50 | 16.08 | 21.33 | 15.00 | 24.42 | 12.70 | 22.22 | 6099 | 300 |
| 20x20 | ¾"x¾" | 33.00 | 22.45 | 26.60 | 20.20 | 28.35 | 18.00 | 25.55 | 6100 | 900 |
| 25x25 | 1"x1" | 40.00 | 28.68 | 33.11 | 27.11 | 31.68 | 23.52 | 28.68 | 6101 | 100 |
| 32x32 | 1¼"x1¼" | 48.70 | 35.08 | 42.10 | 32.63 | 34.85 | 27.90 | 31.85 | 6102 | 100 |
| 40x40 | 1½"x1½" | 54.72 | 41.66 | 48.21 | 38.90 | 37.80 | 33.82 | 34.80 | 6103 | 40 |
| 50x50 | 2"x2" | 67.60 | 54.38 | 60.27 | 51.40 | 40.80 | 38.28 | 37.53 | 6104 | 20 |
| * ALL dimensions in "MM" |
Related Products
-
COUPLER -
ELBOW 90° -
ELBOW 90° – BRASS INSERT -
ELBOW 45° -
3 WAY ELBOW -
TEE -
CROSS TEE -
TEE – BRASS INSERT -
END CAP -
MALE THREADED ADAPTER (M.T.A.) -
MALE THREADED ADAPTER (M.T.A.) – BRASS INSERT -
FEMALE THREADED ADAPTER (F.T.A.) -
FEMALE THREADED ADAPTER (F.T.A.) – BRASS INSERT -
UNION -
STEP OVER BEND -
TANK NIPPLE -
TANK NIPPLE SOCKET -
TRANSITION BUSH -
SWEEP BEND -
PIPE CLIP -
POWDER COATED METAL CLAMP FOR CPVC PIPE -
CPVC BALL VALVE -
BALL VALVE ACCESSORIES – RED HANDLE -
REDUCER -
REDUCING BUSH -
REDUCING ELBOW 90° -
REDUCING ELBOW 90° – BRASS INSERT -
REDUCING TEE -
REDUCING MALE THREADED ADAPTER (M.T.A.) -
REDUCING MALE THREADED ADAPTER (M.T.A.) – BRASS INSERT -
REDUCING FEMALE THREADED ADAPTER (F.T.A.) -
REDUCING FEMALE THREADED ADAPTER (F.T.A.) – BRASS INSERT -
TEE HOLDER -
HEX NIPPLE -
NON RETURN VALVE -
FLANGE WITH GASKET – OPEN -
FLANGE WITH GASKET – CLOSE -
ALL TOP 6″ & 7″ MIXER -
TOP BOTTOM 6″ & 7″ MIXER -
TOP SIDE 6″ & 7″ MIXER -
HOT UP COLD DOWN 6″ & 7″ MIXER -
HOT SIDE COLD DOWN 6″ & 7″ MIXER -
LONG CONCEALED VALVE -
SHORT CONCEALED VALVE -
SCH 40 – COUPLER -
SCH 40 – ELBOW 90° -
SCH 40 – ELBOW 45° -
SCH 40 – TEE -
SCH 40 – END CAP -
SCH 40 – REDUCER BUSH -
SCH 80 – COUPLER -
SCH 80 – ELBOW 90° -
SCH 80 – ELBOW 45° -
SCH 80 – TEE -
SCH 80 – END CAP -
SCH 80 – MALE THREADED ADAPTER (M.T.A.) -
SCH 80 – FEMALE THREADED ADAPTER (F.T.A.) -
SCH 80 – REDUCER -
SCH 80 – REDUCER BUSH -
SCH 80 – REDUCING TEE -
SCH 80 – FLANGE WITH GASKET – OPEN -
SCH 80 – FLANGE WITH GASKET – CLOSE