| Size (mm) |
Size (Inch) |
Pressure Rating (Kg/cm2) | D | SD | Material Code | Standard Pkg. |
| 20 | ½" | 10 | 20.00 | 17.00 | 2050 | 400 |
| 25 | ¾" | 10 | 25.00 | 19.50 | 2051 | 250 |
| 32 | 1" | 10 | 32.00 | 23.00 | 2052 | 150 |
| 40 | 1.1/4" | 10 | 40.00 | 27.00 | 2053 | 150 |
| 50 | 1.1/2" | 10 | 50.00 | 31.00 | 2054 | 100 |
| 63 | 2" | 6 | 63.00 | 38.00 | 2045 | 45 |
| 75 | 2.1/2" | 6 | 75.00 | 44.50 | 2046 | 40 |
| 90 | 3" | 6 | 90.00 | 52.00 | 2047 | 30 |
| 110 | 4" | 6 | 110.00 | 62.00 | 2048 | 20 |
| 200 | 8" | 6 | 200.00 | 108.00 | 2049 | 4 |
| * All dimensions in "MM" | ||||||
45-degree elbows are commonly used in plumbing and HVAC systems to change the direction of pipe runs at a gentle angle, often where space is limited or a smoother flow is desired.
To install a 45-degree elbow, clean and prepare the pipe ends, apply appropriate adhesive or sealant, and then firmly connect the elbow to the pipes, ensuring proper alignment for a leak-free joint.
While a 45-degree elbow can serve a similar purpose as a 90-degree elbow in certain situations, it cannot directly replace it due to differences in angle. However, it may be used creatively in specific layouts or designs.
To calculate the length of pipe needed for installing a 45-degree elbow, measure the distance from the centre of one pipe to the centre of the other, then add the additional length required to accommodate the elbow's curve and any necessary allowances for fittings.
Chat with us 
