SWR PIPES WITH INTEGRATED RINGS
Back to SWR Pipes & Fittings

SWR PIPES WITH INTEGRATED RINGS

(Conforming to IS:13592)

Finolex SWR pipes support easy installation as the Integrated Ring pre-fitted in the groove of the socket remains permanently positioned. The joint is made simply by pushing the spigot end into the socket end, without the use of any Solvent Cement. Finolex lubricant should be used for easy insertion. The ring forms a leakproof joint and absorbs the linear expansion and contraction, keeping the seal intact.

Request Callback | Call 1800 200 3466 to place your order via phone

DIMENSIONS OF SWR PIPES WITH INTEGRATED RINGS

TYPE A

Nominal Diameter (DN) Mean Outside Diameter of Pipe (mm) Inside diameter at Socket ‘D1’ (mm) Inside diameter of Beading ‘D2’ (mm) Wall Thickness ‘S’ (mm) Material
Code
Std. Pipe
Length
mm inch Min Max. Min Max. Min Max. Min. Max   meter 
75 2.5″ 75.0 75.3 75.3 76.4 84.5 85.5 1.8 2.2 7001 3
75 2.5″ 75.0 75.3 75.3 76.4 84.5 85.5 1.8 2.2 7002 3.66
75 2.5″ 75.0 75.3 75.3 76.4 84.5 85.5 1.8 2.2 7003 6
90 3″ 90.0 90.3 90.3 91.4 99.5 100.5 1.9 2.3 7004 3
90 3″ 90.0 90.3 90.3 91.4 99.5 100.5 1.9 2.3 7005 3.56
90 3″ 90.0 90.3 90.3 91.4 99.5 100.5 1.9 2.3 7006 6
110 4″ 110.0 110.4 110.4 111.6 120.3 121.3 2.2 2.7 7007 3
110 4″ 110.0 110.4 110.4 111.6 120.3 121.3 2.2 2.7 7008 3.66
110 4″ 110.0 110.4 110.4 111.6 120.3 121.3 2.2 2.7 7009 6
160 6″ 160.0 160.5 160.5 161.5 173.8 175.0 3.2 3.8 7010 3
160 6″ 160.0 160.5 160.5 161.5 173.8 175.0 3.2 3.8 7011 6

TYPE B

Nominal Diameter (DN) Mean Outside Diameter of Pipe (mm) Inside diameter at Socket ‘D1’ (mm) Inside diameter of Beading ‘D2’ (mm) Wall Thickness ‘S’ (mm) Material
Code
Std. Pipe
Length
mm inch Min Max. Min Max. Min Max. Min. Max   meter
75 2.5″ 75.0 75.3 75.3 76.4 84.5 85.5 3.2 3.8 7013 3
75 2.5″ 75.0 75.3 75.3 76.4 84.5 85.5 3.2 3.8 7014 3.66
75 2.5″ 75.0 75.3 75.3 76.4 84.5 85.5 3.2 3.8 7015 6
90 3″ 90.0 90.3 90.3 91.4 99.5 100.5 3.2 3.8 7016 3
90 3″ 90.0 90.3 90.3 91.4 99.5 100.5 3.2 3.8 7017 3.66
90 3″ 90.0 90.3 90.3 91.4 99.5 100.5 3.2 3.8 7018 6
110 4″ 110.0 110.4 110.4 111.6 120.3 121.3 3.2 3.8 7019 3
110 4″ 110.0 110.4 110.4 111.6 120.3 121.3 3.2 3.8 7020 3.66
110 4″ 110.0 110.4 110.4 111.6 120.3 121.3 3.2 3.8 7021 6
160 6″ 160.0 160.5 160.5 161.5 173.8 175.0 4.0 4.6 7022 3
160 6″ 160.0 160.5 160.5 161.5 173.8 175.0 4.0 4.6 7023 6

Cut Lengths in SWR Pipes with Integrated Rings

Type A

Nominal Diameter
(DN)
Material
Code
Std.
Length
mm inch S/S D/S feet
75 2½” 7030 2
75 2½” 7031 3
75 2½” 7032 4
75 2½” 7024 7033 6
75 2½” 7025 9
75 2½” 7034 10
75 2½” 7035 20
90 3″ 7036 2
90 3″ 7037 3
90 3″ 7038 4
90 3″ 7026 7039 6
90 3″ 7040 10
90 3″ 7041 20
110 4″ 7042 2
110 4″ 7043 3
110 4″ 7044 4
110 4″ 7027 7045 6
110 4″ 7028 9
110 4″ 7046 10
110 4″ 7047 20
160 6″ 7048 2
160 6″ 7049 3
160 6″ 7050 4
160 6″ 7029 7051 6
160 6″ 7052 10
160 6″ 7053 20
S/S :- Single Socket D/S:- Double Socket

Cut Lengths in SWR Pipes with Integrated Rings

Type B

Nominal Diameter
(DN)
Material
Code
Std.
Length
mm inch S/S D/S feet
75 2½” 7054 1.5
75 2½” 7064 2
75 2½” 7055 7065 3
75 2½” 7066 4
75 2½” 7056 7067 6
75 2½” 7068 10
75 2½” 7069 20
90 3″ 7070 2
90 3″ 7071 3
90 3″ 7072 4
90 3″ 7057 7073 6
90 3″ 7074 10
90 3″ 7075 20
110 4″ 7058 1.5
110 4″ 7076 2
110 4″ 7059 7077 3
110 4″ 7078 4
110 4″ 7060 7079 6
110 4″ 7061 9
110 4″ 7080 10
110 4″ 7081 20
160 6″ 7082 2
160 6″ 7062 7083 3
160 6″ 7084 4
160 6″ 7063 7085 6
160 6″ 7086 10
160 6″ 7087 20
Back to
×
Content Here

Enquiry Form

For any trade enquiry call

18002003466

Enquiry Form

Fill in the details below and one of our executives will get back to you shortly.